Catalogue
Sitemap
PRODUCT
DISPLAY CONTROLLER
DISPLAY CONTROLLER
MERCURY
Features
The MERCURY is designed
for ready to use the application of 12.3” LG LCD modules;
•LA123WF1-SR03
•LA123WF4-SR03
•LA123WF4-SR08
Display
•Digital
Video Interface for LG 12.3” RSDS interface type stretched type LCD panels such
as LA123WF1-SR03, LA123WF4-SR03 and LA123WF4-SR08
models
•Video
data stream has to be re-aligned by from left/right order to odd/even order in
order to see one unity screen.
Mercury has a
high speed digital processor that realigns pixel mapping. Data processing delay
is less than 1 line.
Video Input
•2
input types are available, LVDS or DVI type.
•Support
8 bits direct Single-link LVDS Input mode (Can not be used with DVI type)
•Support
8 bits RGB 4:4:4 DVI Input mode (Can not be used with LVDS type)
Others
•Mercury
also
supplies power requirements for LCD panel such as Vgh, Vgl, Vcom and
Gamma reference voltages with single DC12V input.
•Mercury
provides backlight
control unit with just in-place connector for BLU(LED) FFC cable from LA123WF1,
LA123WF3 and LA123WF4 panels side.
Placement guide holes are crafted on the PCB
for easier positioning when attaching the board to rear side of LCD panels.
Basic
Features
•Digital
Video Interface for LG LA123WFx-SR0x Panels
•2
HDMI input and 1 C-VBS input are available.
•Support
8 bits HDMI 1.4 Input mode
•Integrated
Backlight Controller with Analog and PWM dimming
•Integrated
power management with single 12V input
•Integrated
power supply for VGH/VGL/VCOM
•Integrated
Gamma reference voltage supply
•Full
control of all relevant display and interface parameters via OSD
•Multi
language support
•Compatible
with VESA DPMS power saving modes
•Image
Flip / Mirror supportable by OSD Menu
•Serial
Control (RS232C) ready / Customized protocol setting (optional contract basis)
•Audio
support (2W x 2W speaker out)
•Media
Player Support by USB connection (MPEG4)
•Automatic
EDID support for any user’s resolution without any users’ setting separately.
•In
case of Raspberry Pi users are requested to set users’ virgin condition
Raspberry Pi by the indicated below ;
Add following information to CONFIG.txt at Raspberry Pi bootloader.
hdmi_group=2
hdmi_mode=87
hdmi_timings=1920 0 0 2 126 720 0 2 2 4 0 0 0 60 0 89456640 8
Conditions
Operating Temperature : -10°C~70°C
Operating
Humidity : 20%~90%RH
Storage
Temperature : -20°C~70°C
Storage
Humidity : 5%~90%RH
Dimension
185 mm X 93mm
이메일무단수집거부
이메일 무단수집을 거부합니다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나 그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며, 이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
- PRODUCT
- PRODUCT NEWS
- CONTACT US